Roof Sheeting
Roof sheeting comes in many different styles and profiles to suit different situations and tastes, for advice on what best suits you talk to our friendly staff. Sheets come at standard widths and can be ordered in any length meaning cutting on site is left to a minimum. All roof sheeting comes in two distinct finishes, Zincalume and Colorbond.
|
There is a wide variety of roof sheeting available including:
Custom Orb Australia's favorite, corrugated iron. Spans up to 1200mm at a minimum 5 degree pitch. Used for straight roofs but alternatively 'Custom Blue Orb' is used for curve roofs with a maximum span of 1800mm at a minimum pitch of 5 degrees. Fixed with tech screws through the sheeting into either steel or timber.
Trimdek Another favorite with a flatter profile then the custom orb allowing a lower pitch. Can spans up to 1900mm at a minimum 2 degree pitch. Fixed with tech screws through the sheeting into either steel or timber.
Spandek Great for situations where you need greater spans of up to 2400mm at a minimum 3 degree roof pitch. Fixed with tech screws through the sheeting into either steel or timber.
Kliplok 406 and 700 Fixed with clips, meaning no screws through the sheets, improving waterproofing. Spans up to 2200mm at a minimum 2 degree pitch.
Flatdek Perfect for awnings, because it allows very large spans with a Colorbond finish to both sides of the sheet. Spans up to 3000mm at a minimum 2 degree pitch.
For the full range of roof sheeting profiles available and the latest technical information please see the Bluescope Lysaght website. Our friendly staff can also assist you on your product and colour selection.
Colorbond Colours
Colours are approximate for exact colours please see in store Please note that these products are not here in stock and will have to be ordered in |
Related
Links |